A range of straight plastic hosetails for use with Series A and custom built Water, Waste and Grey Water Tanks.
\n
\nThe hosetails are screwed onto male threaded HDPE socket by means of a separate female nut. The socket is welded to the tank by Tek Tanks using an advanced fusion welding process. The hosetail is sealed with a ribbed rubber washer that contacts the underside of the hosetail and the top of the machined socket face. These fittings need only to be done up hand tight.
\n
\nThe price includes marking out, drilling the hole, welding the threaded socket and the pressure testing of the whole fitted assembly.
\n
\nThe threaded socket is not removable once welded to the tank and stands 24mm above the tank top. Please allow for this measurement when considering how to get the tank in and out of position.
\n
\nDip pipes for drawing off the contents with a pump can be fitted to any of these assemblies. Please see the Dip Pipe products for more information on lengths and available diameters and materials.
\n
\nHeight above tank top:
\nS13P = 64mm
\nS16P = 64mm
\nS19P = 68mm
\nS25P = 74mm
\nS38P = 92mm
\nS50P = 100mm
\n
\n
\n \nReplacement Sealing Washers can be found here. \n \n
\n \n
\n \nReplacement Sealing Washers can be found here. \n \n
\n \n