\n
\nSupplied with Single Coil, Temperature Pressure Relief Valve.
\nHeating time from cold is approximately 20 minutes for a full tank of hot water with a 3kw immersion heater. When connected to the engine, useful amounts of hot water are available within a few minutes due to the increased surface area of the internal coil.
\n
\n
\n
\n
\nEfficient, 100% ozone-friendly foam insulation keeps the water hot for hours.
\n
\n
\n \nFor Information on how C-Warm heaters work, technical specification and what is required for a trouble free installation then please click here. \n \n
\n \nFeatures: \n \n
\n\n \nFor Information on how C-Warm heaters work, technical specification and what is required for a trouble free installation then please click here. \n \n
\n \nFeatures: \n \n
-
\n
- Capacity: 20 litres (4.5 gallons) \n
- Connections: Heating Coil ¾", Cold in & Hot out ½" \n
- Dimensions: 380 mm high, 345 mm diameter \n
- Materials of Construction \nTank: Copper \nInsulation: Polyurethane \n
- Maximum Working Pressure: up to 3 bar (42 p.s.i.) \n
- Maximum recommended pump cut-out pressure: 2.5 bar (36 psi) \n
- Weight when empty: 9.4 kg \n
- Stored water temperature up to the circulation temperature of the engine cooling water. Use thermostat to limit to 55º - 60º C if necessary \n
- Packaged Dimensions: L: 41.00 x H: 49.00 x W: 41.00 cm \n
- Warranty: 3 years \n