Gravity Discharge Holding Tank Layouts. Follow this link on how to plumb this tank into your boat.
\n
\nRotationally Moulded 10mm thick Series A Waste Tank.
\nVertically Mounted can be bolted directly to a bulkhead or suitable structure saving time and money on installation.
\nLarge inspection hatch which can be easily removed for cleaning and maintenance.
\nThe bottom of the tank is gently sloped to assist the migration of the waste to the outlet.
\nCan be used with an open seacock when at sea.
\nThe deck pump out is situated directly above the outlet in case of blockage.
\nSupplied with 4 x 10mm stainless steel coach bolts for mounting to a bulkhead or ply plate.
\n
\nDimensions:
\nLength: 400mm
\nWidth: 250mm
\nHeight: 750mm
\n
\nFittings:
\n1 x 175mm Nuts and Bolts Hatch
\n2 x 1 1/2" Plastic Elbow Hosetails
\n2 x 1 1/2" Plastic Straight Hosetails
\n1 x Dip Pipe
\n
\nCapacity: 60 Litres
\n
\nThis range of tanks can be supplied as a customised package to suit individual requirements. Please call for more information if you require this option.
\n
\nAs standard they are supplied with an 1 1/2" straight outlet in the tank bottom, an 1 1/2" straight deck pumpout fitting with an internal dip pipe, an 1 1/2" elbow vent and an 1 1/2" elbow inlet. For really successful gravity discharge a 2" outlet would be more suitable, which can be fitted by Tek Tanks if required. This will of course require a 2" seacock.
\n
\nComes with a Tek Tanks 5 year warranty as standard on this product.
\n
\nThese Tanks are subject to a lead time of 7-10 Working Days