Volume [litres] : 190
\nDimensions [mm]: Length: 1100; Width: 300; Height: 785.
\n
\nSuitability: Fresh Water, Grey Water, Black Water, Diesel, not suitable for Petrol
\nMaterial: Medium Density Polyethylene (MDPE)
\nWall thickness [mm]: 10
\nColour: Natural; (Black available at extra cost, subject to a lead time)
\nLead time: 7-10 workings days (with Tek Tank fittings*), 1-2 working days (without fittings)
\nOrientation: Can be orientated in any position
\nWarranty: 5 years
\n
\n* Please click here to choose from extensive range of Tek Tank fittings suitable for this tank.
\nTo see all of the fittings at a glance, please download the Fittings Guide from the product documents box above. If the fitting you require is not shown, then please give us a call to discuss your requirements.
\n
\n
\n \nDownload your chosen tank drawing, mark on the drawing your fitting locations. Identify the fittings that you require by clicking on the fittings link here. \nBe aware that unless stated our fittings are welded into the tanks and are not available to be retrofitted. Add the fittings part numbers to the drawing... View a sample drawing here. \nEmail your completed drawing to us and we will be in touch. \n \n \n
\n \nBlack & Grey Waste \nThe tanks 10mm wall thickness ensures that holding waste odours are contained within the tank, not so with thinner walled cheaper tanks. \n \nWater \nTek Tanks quality food grade plastic ensures that you will never experience any plastic taste to the water. \n \nDiesel Fuel \nThe thermal properties of a Tek Tank almost eradicates the build-up of condensation limiting the possibility of water in the fuel. \n \n
\n \n3D Interactive Model \n \n \n
\n \nNotes: \nThese tanks are not suitable as the main supply to a vehicles engine in automotive applications. These tanks must be positioned outside of an engine compartment of a boat and away from other heat sources. The tanks should be situated in a well ventilated area.
\n \nDownload your chosen tank drawing, mark on the drawing your fitting locations. Identify the fittings that you require by clicking on the fittings link here. \nBe aware that unless stated our fittings are welded into the tanks and are not available to be retrofitted. Add the fittings part numbers to the drawing... View a sample drawing here. \nEmail your completed drawing to us and we will be in touch. \n \n \n
\n \nBlack & Grey Waste \nThe tanks 10mm wall thickness ensures that holding waste odours are contained within the tank, not so with thinner walled cheaper tanks. \n \nWater \nTek Tanks quality food grade plastic ensures that you will never experience any plastic taste to the water. \n \nDiesel Fuel \nThe thermal properties of a Tek Tank almost eradicates the build-up of condensation limiting the possibility of water in the fuel. \n \n
\n \n3D Interactive Model \n \n \n
\n \nNotes: \nThese tanks are not suitable as the main supply to a vehicles engine in automotive applications. These tanks must be positioned outside of an engine compartment of a boat and away from other heat sources. The tanks should be situated in a well ventilated area.